Austrian Market for Dental Prosthetics and CAD/CAM Devices 2011

Published: March 2011
No. of Pages: 87

Price

Report Summary

Austria is a member of the European Union located in Central Europe and has a population of approximately 8.4 million. Austria is a growing and affluent market. There were approximately 4,500 dentists in the country in 2010, providing a high standard of dental care, comparable to that received in the United States.

This report also includes the following market segments:

Crown and Bridge Market
Denture Market
CAD/CAM System Market
CAD/CAM Block and Prosthetic Market

The aging population and demand for superior dental aesthetics are driving the prosthetics market. The global economic recession of 2008 and 2009 resulted in a slowdown in total market growth; however, the market began to recover in 2010 and is expected to experience accelerating growth by 2017. CAD/CAM manufactured prosthetics are expected to represent the fastest growing segment while the CAD/CAM system market will exhibit high unit growth rates over the forecast period.

This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

Austrian Market for Dental Prosthetics and CAD/CAM Devices 2011

TABLE OF CONTENTS

TABLE OF CONTENTSI
LIST OF FIGURESIV
LIST OF CHARTSVI
EXECUTIVE SUMMARY 1
11 TOTAL EUROPEAN DENTAL PROSTHETICS MARKETS 1
12 CAD/CAM PROSTHETICS MARKETS 2
13 DENTAL STATISTICS 3
14 TREND ANALYSIS BY COUNTRY 4
15 TREND ANALYSIS BY SEGMENT 5
16 CROWN AND BRIDGE MARKET 6
17 DENTURE MARKET 7
18 CAD/CAM SYSTEM MARKET 8
19 FULL IN-LAB CAD/CAMSYSTEMS 9
110 STANDALONE SCANNER MARKET 10
111 CHAIRSIDE SYSTEM MARKET 11
112 COMPETITIVE ANALYSIS 12
RESEARCH METHODOLOGY 13
21 RESEARCH SCOPE 13
22 IDATA’S 9-STEP METHODOLOGY 13
Step 1: Project Initiation & Team Selection 14
Step 2: Prepare Data Systems and Perform Secondary Research 15
Step 3: Preparation for Interviews & Questionnaire Design 16
Step 4: Performing Primary Research 17
Step 5: Research Analysis: Establishing Baseline Estimates 19
Step 6: Market Forecast and Analysis 19
Step 7: Identify Strategic Opportunities 21
Step 8: Final Review and Market Release 22

Table of Contents

Step 9: Customer Feedback and Market Monitoring 23
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
24
31 INTRODUCTION 24
32MARKET ANALYSIS AND FORECAST 25
321 Dental Prosthetics Market 25
322 Crown and Bridge Market 29
3221 Porcelain-Fused Metal Market36
3222 Full-Cast Market 38
3223 All-Ceramic Market 40
323 CAD/CAM Prosthetics 42
324 Denture Market 48
3241 Full Denture Market 52
3242 Partial Denture Market 52
325 CAD/CAM System Market 54
3251 Full In-Lab CAD/CAM System Market56
3252 Standalone Scanner Market59
3253 Chairside System Market63
33MARKET DRIVERS AND LIMITERS 66
331 Dental Prosthetics Market 66
3311 Market Drivers66
3312 Market Limiters 67
332 Crown and Bridge Market 69
3321 Market Drivers69
3322 Market Limiters 70
333 Denture Market 71
3331 Market Drivers71
3332 Market Limiters 72
334 CAD/CAM System Market 72
3341 Market Drivers72
3342 Market Limiters 73
34 COMPETITIVE ANALYSIS 76
341 CAD/CAM Systems 76

Table of Contents

3411 Full In-Lab System Market 80
3412 Standalone Scanner Market83
3413 Chairside Systems86
ABBREVIATIONS 87

List of Figures

LIST OF FIGURES
EXECUTIVE SUMMARY 1
RESEARCH METHODOLOGY 13
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS 24
Figure 14-1: Total Dental Prosthetics Market, Austria, 2007 – 2017 (€) 26
Figure 14-2: Total Dental Prosthetics Market, Austria, 2007 – 2017 (US$) 27
Figure 14-3: Crown and Bridge Market, Austria, 2007 – 2017 (€) 30
Figure 14-4: Crown and Bridge Market, Austria, 2007 – 2017 (US$) 30
Figure 14-5: Crown and Bridge Market Segmented by Material Type, Austria,
2007 – 2017 32
Figure 14-6: Porcelain-Fused Metal Device Market, Austria, 2007 – 2017 (€) 37
Figure 14-7: Porcelain-Fused Metal Device Market, Austria, 2007 – 2017 (US$) 37
Figure 14-8: Full-Cast Device Market, Austria, 2007 – 2017 (€) 39
Figure 14-9: Full-Cast Device Market, Austria, 2007 – 2017 (US$) 39
Figure 14-10: All-Ceramic Device Market, Austria, 2007 – 2017 (€) 41
Figure 14-11: All-Ceramic Device Market, Austria, 2007 – 2017 (US$) 41
Figure 14-12: CAD/CAM Prosthetics Market, Austria, 2007 – 2017 (€) 43
Figure 14-13: CAD/CAM Prosthetics Market, Austria, 2007 – 2017 (US$) 43
Figure 14-14: Chairside CAD/CAM Prosthetics Market, Austria, 2007 – 2017 (€)45
Figure 14-15: Chairside CAD/CAM Prosthetics Market, Austria, 2007 – 2017
(US$) 45
Figure 14-16: In-Lab CAD/CAM Prosthetics Market, Austria, 2007 – 2017 (€) 47
Figure 14-17: In-Lab CAD/CAM Prosthetics Market, Austria, 2007 – 2017 (US$)47
Figure 14-18: Denture Market Segmented by Type, Austria, 2010 49
Figure 14-19: Denture Market, Austria, 2007 – 2017 (€) 50
Figure 14-20: Denture Market, Austria, 2007 – 2017 (US$) 50
Figure 14-21: Denture Market by Type, Austria, 2007 – 2017 53
Figure 14-22: CAD/CAM System Market, Austria, 2007 – 2017 (€ and US$) 54
Figure 14-23: Full In-Lab CAD/CAM System Market, Austria, 2007 – 2017 (€) 57

List of Figures

Figure 14-24: Full In-Lab CAD/CAM System Market, Austria, 2007 – 2017
(US$) 57
Figure 14-25: Standalone Scanner Market, Austria, 2007 – 2017 (€) 60
Figure 14-26: Standalone Scanner Market, Austria, 2007 – 2017 (US$) 61
Figure 14-27: Chairside System Market, Austria, 2007 – 2017 (€) 64
Figure 14-28: Chairside System Market, Austria, 2007 – 2017 (US$) 64
Figure 14-29: Market Drivers and Limiters, Dental Prosthetics Market, Austria,
2010 69
Figure 14-30: Market Drivers and Limiters, Crown and Bridge Market, Austria,
2010 71
Figure 14-31: Market Drivers and Limiters, Denture Market, Austria, 2010 72
Figure 14-32: Market Drivers and Limiters, CAD/CAM System Market, Austria,
2010 75
Figure 14-33: Leading Competitors, CAD/CAM System Market, Austria, 2010 78
Figure 14-34: Leading Competitors, Full In-Lab CAD/CAM System Market,
Austria, 2010 82
Figure 14-35: Leading Competitors, Standalone Scanner In-Lab CAD/CAM
System Market, Austria, 2010 84
ABBREVIATIONS 87

List of Charts

LIST OF CHART S
EXECUTIVE SUMMARY 1
Chart 1-1: Dental Prosthetics Market, Europe, 2007 – 2017 (€M) 1
Chart 1-2: Percentage of Prosthetics Fabricated by CAD/CAM Technology
versus Conventional Methods, Europe, 2007 – 2017 2
Chart 1-3: Population per Dentist by Country, Europe, 2010 3
Chart 1-4: Dental Prosthetics Market by Country, Europe, 2010 4
Chart 1-5: Growth Rates by Segment, Full-Cast Crown and Bridge Market,
Europe, 2007 – 2017 5
Chart 1-6: Crown and Bridge Market, Europe, 2007 – 2017 (€M) 6
Chart 1-7: Growth Rates by Segment, Denture Market, Europe, 2007 – 2017 7
Chart 1-8: CAD/CAM System Market, Europe, 2007 – 2017 (€M) 8
Chart 1-9: Full In-Lab CAD/CAM System Market, Europe, 2007 – 2017 (€M) 9
Chart 1-10: Standalone Scanners Installed Base, Europe, 2007 – 2017 10
Chart 1-11: Chairside CAD/CAM system Installed Base, Europe, 2007 – 2017 11
Chart 1-12: Leading Competitors, CAD/CAM System Market, Europe, 2010 12
RESEARCH METHODOLOGY 13
AUSTRIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS 24
Chart 14-1: Total Dental Prosthetics Market, Austria, 2007 – 2017 (€M) 28
Chart 14-2: Crown and Bridge Market, Austria, 2007 – 2017 (€M) 31
Chart 14-3: Crown and Bridge Market Segmented by Material, Austria, 2010 33
Chart 14-4: Crown and Bridge Market Segmented by Material, Austria, 2017 34
Chart 14-5: Crown and Bridge Units by Material Type, Austria, 2007 – 2017 35
Chart 14-6: Denture Market, Austria, 2007 – 2017 (€M) 51
Chart 14-7: CAD/CAM System Market, Austria, 2007 – 2017 (€M) 55
Chart 14-8: Full In-Lab CAD/CAM System Market, Austria, 2007 – 2017 (€M) 58
Chart 14-9: Standalone Scanner Market, Austria, 2007 – 2017 (€M) 62
Chart 14-10: Chairside System Market, Austria, 2007 – 2017 (€M) 65
Chart 14-11: Leading Competitors, CAD/CAM System Market, Austria, 2010 79

List of Charts

Chart 14-12: Leading Competitors, Full In-Lab CAD/CAM System Market,
Austria, 2010 82
Chart 14-13: Leading Competitors, Standalone Scanner In-Lab CAD/CAM
System Market, Austria, 2010 85
ABBREVIATIONS 87

Published By: iData Research
Product Code: iData Research1192

Did you find what you are/were looking for ? If not, read below and browse through other relevant pages for similar market research reports OR get in touch with us through the form/contact info in your right navigation panel and we’ll share relevant market report titles for you to explore.

Related Reports:

U.S. Market for Dental Prosthetics and CAD/CAM Devices 2011
In 2010, the U.S. market for dental prosthetics, which includes crowns, bridges, inlays/onlays, veneers and dentures, exceeded $11 billion. The market has recovered from the slowdown caused by the econom...
Emerging Markets: Chinese and Indian Dental Prosthetics and CAD/CAM Devices 2011
In 2010, the total Chinese and Indian markets for Dental Prosthetics and CAD/CAM were valued at nearly $666 million, a 7.5% increase over the pre...
South Korean Market for Dental Prosthetics and CAD/CAM Devices 2011
South Korea has the second largest market for dental prosthetics in the Asia-Pacific market. The emphasis on dental aesthetics in South Korea is ...
Australian Market for Dental Prosthetics and CAD/CAM Devices 2011
The Australian market for dental prosthetics was the third largest market in the Asia- Pacific region in 2010. Compared to other countries, Austr...
Japanese Market for Dental Prosthetics and CAD/CAM Devices 2011
In 2010, the Japanese market for dental prosthetic and CAD/CAM devices was the largest in Asia-Pacific region. The market for dental prosthetics ...
Italian market for Dental Prosthetics and CAD/CAM Devices 2011
The Italian market for dental prosthetics was the second largest market in Europe in 2010. Italy had the fourth largest population in the European Union, with 60.1 million people. The Italian oral healthcare s...
German Market for Dental Prosthetics and CAD/CAM Devices 2011
The German dental prosthetics market is the largest in Europe. This is mainly attributed to the size of the Germany is population, which is the second largest Europe. The German dental prosthetics market is also driven by superior research, develo...
French Market for Dental Prosthetics and CAD/CAM Devices 2011
France is the second largest country in the European Union. In 2010, the French market for dental prosthetics was the fourth largest in Europe, The market is similar to other western European markets, as the crown and bridge market is near ...
Beleuxian Market for Dental Prosthetics and CAD/CAM Devices 2011
The Benelux market includes the Netherlands, Belgium and Luxembourg. The market in the Netherlands experienced substantial growth due to the introduction of a reimbursement policy for dentures in 2005. B...
Austrian Market for Dental Prosthetics and CAD/CAM Devices 2009
Austria represents a growing and affluent market, whose Dentists offer a high standard of care, comparable to that of the United States. Future Austrian demand for dental prosthetics will grow more slowly than it has in recent years due to a gener...

Connect With Us

Email: sales@reportsandreports.com Call : + 1 888 391 5441

Subscription Option

Using our subscription option, you get access to market research reports and industry data of Medical Devices market as per your needs. Get the best of Medical Devices research reports by utilizing your research budgets in an optimum way.

More about our Subscription option

Email Alerts

Get Email alerts about market research reports from industries and publishers of your interest: