Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)

Published: December 2009
No. of Pages: 244

Price

Report Summary

In 2008, the Asia-Pacific market for dental prosthetics (crowns, bridges and dentures) was valued at over US$6 billion. The Asia-Pacific market includes Australia, Japan and South Korea. The aging population and greater demand for aesthetic dentistry are driving forces in the prosthetics market. The global economic crisis, which began in 2008, has led to a slowdown in the overall market; however, the market is expected to grow over the forecast period, reaching US$7.2 billion by 2015.

This market includes:

Crowns and bridges
Dentures
Dental alloys and porcelain powder
Computer aided design/computer aided manufacture (CAD/CAM) systems

The Japanese market for dental prosthetics was the largest in terms of both unit volume and market value, as it accounted for approximately 80% of the total Asia-Pacific market.

All-ceramic prosthetic devices made using CAD/CAM technology are quickly gaining market share at the expense of conventionally fabricated devices. Although the economic recession has constrained patients’ discretionary incomes and limited the crowns and bridges market, the market for all-ceramic restorations is expected to quickly re-establish growth following the economic recovery.

The Asia-Pacific dental prosthetics market includes many local players such as: Addens, Ceracys, Dentaim and Renis in South Korea; GC in Japan; and Stoneglass in Australia. This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2015, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)

Table Of Contents

EXECUTIVE SUMMARY
    1.1 OVERVIEW: ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS
    1.2 TREND ANALYSIS BY COUNTRY
    1.3 MARKET FOR CROWNS AND BRIDGES
    1.4 MARKET FOR DENTURES
    1.5 MARKET FOR CAD/CAM SYSTEMS
    1.6 LEADING COMPETITORS IN THE DENTAL CAD/CAM MARKET

RESEARCH METHODOLOGY
    2.1 RESEARCH SCOPE
    2.2 IDATA’S 9-STEP METHODOLOGY

    Step 1: Project Initiation & Team Selection
    Step 2: Prepare Data Systems and Perform Secondary Research
    Step 3: Preparation for Interviews & Questionnaire Design
    Step 4: Performing Primary Research
    Step 5: Research Analysis: Establishing Baseline Estimates
    Step 6: Market Forecast and Analysis
    Step 7: Identify Strategic Opportunities
    Step 8: Final Review and Market Release
    Step 9: Customer Feedback and Market Monitoring

INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
3.1 INTRODUCTION
3.2 CROWNS AND BRIDGES
    3.2.1 Crowns
    3.2.2 Bridges
    3.2.3 Material Types
    3.2.3.1 Full-Cast Crowns and Bridges
    3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys
    3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys
    3.2.3.4 All-Ceramic Devices
    3.2.3.5 Hard-Resin Material
3.3 INLAYS AND ONLAYS
    3.3.1 Material Types
    3.3.1.1 Gold
    3.3.1.2 Porcelain
    3.3.1.3 Composite Resin
3.4 DENTURES
    3.4.1 Full Dentures
    3.4.2 Partial Dentures
3.5 MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS
    3.5.1 Conventional Fabrication
    3.5.2 CAD/CAM Technology
    3.5.3 Three-Dimensional Printing
    3.5.4 Digital Impression-Taking

ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
4.1 INTRODUCTION
4.2 CURRENCY EXCHANGE RATE
4.3 MARKET ANALYSIS AND FORECAST
4.4 MARKET BY SEGMENT
      4.4.1 Market for Crowns and Bridges
     .4.2 Market for Dentures
    4.4.3 Market for CAD/CAM Systems
4.4.3.1 Market for Full In-Lab CAD/CAM System
    4.4.3.2 Market for Standalone In-Lab Scanner CAD/CAM Systems
      4.4.3.3 Market for Chairside Systems
4.5 DRIVERS AND LIMITERS
   4.5.1 Drivers and Limiters for Dental Prosthetics
     4.5.1.1 Market Drivers
    4.5.1.2 Market Limiters
4.5.2 Drivers and Limiters for CAD/CAM Systems
    4.5.2.1 Market Drivers
    4.5.2.2 Market Limiters
4.6 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
4.7 MERGERS AND ACQUISITIONS
    4.7.1 3M Acquired Brontes Technologies Inc
    4.7.2 Straumann Acquired etkon AG
4.8 MARKET HIGHLIGHTS
    4.8.1 Nobel Biocare’s Debut of NobelProcera® Scanner
    4.8.2 Wieland’s Introduction of ZENOTEC® T1 Milling System
    4.8.3 Sirona Releases Digital Impression Taking System - CEREC® Bluecam
    4.8.4 3M’s Lava™ Chairside Oral Scanner (C.O.S.)

COUNTRY PROFILES
5.1 INTRODUCTION
    5.1.1 Population
    5.1.2 Median Age
    5.1.3 GDP Per Capita
    5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants
    5.1.5 Price Index
5.2 SOUTH KOREA
5.3 JAPAN
5.4 AUSTRALIA
5.5 DENTISTS PER CAPITA BY COUNTRY

SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
    6.1 INTRODUCTION
    6.2 TOTAL MARKET FOR DENTAL PROSTHETICS
    6.2.1 Market Analysis and Forecast
6.3 MARKET FOR CROWNS AND BRIDGES
    6.3.1 Market Analysis and Forecast
    6.3.1.1 Market for Porcelain-Fused-To-Metal Devices
    6.3.1.2 Market for Full-Cast Devices
    6.3.1.3 Market for All-Ceramic Devices
6.4 MARKET FOR DENTURES
    6.4.1 Market Analysis and Forecast
    6.4.1.1 Market for Full Dentures
    6.4.1.2 Market for Partial Dentures
6.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
    6.5.1 Market Analysis and Forecast
    6.5.1.1 Market for Full In-Lab CAD/CAM Systems
    6.5.1.2 Market for Standalone Scanner In-Lab CAD/CAM Systems
    6.5.1.3 Market for Chairside Systems
6.6 DRIVERS AND LIMITERS
    6.6.1 Drivers and Limiters for Dental Prosthetics
    6.6.1.1 Market Drivers
    6.6.1.2 Market Limiters
6.6.2 Drivers and Limiters for CAD/CAM Systems
    6.6.2.1 Market Drivers
    6.6.2.2 Market Limiters
6.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
    6.7.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
    6.7.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM Systems

JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
7.1 INTRODUCTION
7.2 TOTAL MARKET FOR DENTAL PROSTHETICS
    7.2.1 Market Analysis and Forecast
7.3 MARKET FOR CROWNS AND BRIDGES
    7.3.1 Market Analysis and Forecast
    7.3.1.1 Market for Porcelain-Fused-To-Metal Devices
    7.3.1.2 Market for Full-Cast Devices
    7.3.1.3 Market for All-Ceramic Devices
    7.3.1.4 Market for Hard-Resin Devices
7.4 MARKET FOR DENTURES
    7.4.1 Market Analysis and Forecast
    7.4.1.1 Market for Full Dentures
    7.4.1.2 Market for Partial Dentures
7.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
    7.5.1 Market Analysis and Forecast
    7.5.2 Full In-Lab CAD/CAM Systems
    7.5.3 Standalone Scanner In-Lab CAD/CAM Systems
    7.5.4 Chairside Systems
7.6 DRIVERS AND LIMITERS
    7.6.1 Drivers and Limiters for Dental Prosthetics
    7.6.1.1 Market Drivers
    7.6.1.2 Market Limiters
7.6.2 Drivers and Limiters for CAD/CAM Systems
    7.6.2.1 Market Drivers
    7.6.2.2 Market Limiters
7.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
    7.7.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
    7.7.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM Systems

AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
8.1 INTRODUCTION
8.2 TOTAL MARKET FOR DENTAL PROSTHETICS
    8.2.1 Market Analysis and Forecast
8.3 MARKET FOR CROWNS AND BRIDGES
    8.3.1 Market Analysis and Forecast
    8.3.1.1 Market for Porcelain-Fused-To-Metal Devices
    8.3.1.2 Market for Full-Cast Devices
    8.3.1.3 Market for All-Ceramic Devices
8.4 MARKET FOR DENTURES
    8.4.1 Market Analysis and Forecast
    8.4.1.1 Market for Full Dentures
    8.4.1.2 Market for Partial Dentures
8.5 TOTAL MARKET FOR CAD/CAM SYSTEMS
    8.5.1 Market Analysis and Forecast
    8.5.2 Full In-Lab CAD/CAM Systems
    8.5.3 Standalone Scanner In-Lab CAD/CAM Systems
    8.5.4 Chairside Systems
8.6 DRIVERS AND LIMITERS
    8.6.1 Drivers and Limiters for Dental Prosthetics
    8.6.1.1 Market Drivers
    8.6.1.2 Market Limiters
8.6.2 Drivers and Limiters for CAD/CAM Systems
    8.6.2.1 Market Drivers
    8.6.2.2 Market Limiters
8.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS
    8.7.1.1 Competitive Analysis for Full In-Lab CAD/CAM Systems
    8.7.1.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM System
    8.7.1.3 Competitive Analysis for Chairside CAD/CAM systems

ABBREVIATIONS

LIST OF FIGURES

EXECUTIVE SUMMARY
RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Figure 4-1: Exchanges Rates for the U.S. Dollar, 2008
    Figure 4-2: Asia-Pacific Markets for Dental Prosthetics, 2005 - 2015 (US$)
    Figure 4-3: Crowns and Bridges Segmented by Material Type, Asia-Pacific,2005 - 2015
    Figure 4-4: Crown and Bridge Units Segmented by Material Type, Asia-Pacific,2005 - 2015
    Figure 4-5: Asia-Pacific Market for Crowns and Bridges, 2005 - 2015 (US$)
    Figure 4-6: Dentures Segmented by Type, Asia-Pacific, 2005 - 2015
    Figure 4-7: Market for Dentures Segmented by Type, Asia-Pacific, 2005 - 2015 36
    Figure 4-8: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
    Figure 4-9: Market for CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
    Figure 4-10: Market for Full In-Lab CAD/CAM Systems, Asia-Pacific,2005 - 2015 (US$)
    Figure 4-11: Market for Standalone Scanner In-Lab CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
    Figure 4-12: Market for Chairside CAD/CAM Systems, Asia-Pacific,2005 - 2015 (US$)
    Figure 4-13: Market Drivers and Limiters for Dental Prosthetics, South Korea,2008
    Figure 4-14: Market Drivers and Limiters for CAD/CAM Systems, 2008
    Figure 4-15: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific,2008
    Figure 4-16: Leading Competitors, CAD/CAM Systems, Asia-Pacific, 2008

COUNTRY PROFILES

    Figure 5-1: Price Index, Asia-Pacific, 2008
    Figure 5-2: Country Indicators, Asia-Pacific, 2008
    Figure 5-3: Dentists Per Capita by Country, Asia-Pacific, 2008

SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Figure 6-1: Total Market for Dental Prosthetics, South Korea, 2005 - 2015(US$)
    Figure 6-2: Total Market for Dental Prosthetics, South Korea, 2005 - 2015(KRN₩)
    Figure 6-3: Market for Crowns and Bridges, South Korea, 2005 - 2015 (US$)
    Figure 6-4: Market for Crowns and Bridges, South Korea, 2005 - 2015 (KRN₩)
    Figure 6-5: Crowns and Bridges Segmented by Material Type, South Korea,2005 - 2015
    Figure 6-6: Market for PFM Devices, South Korea, 2005 - 2015 (US$)
    Figure 6-7: Market for PFM Devices, South Korea, 2005 - 2015 (KRN₩)
    Figure 6-8: Market for Full-Cast Devices, South Korea, 2005 - 2015 (US$)
    Figure 6-9: Market for Full-Cast Devices, South Korea, 2005 - 2015 (KRN₩)
    Figure 6-10: Market for All-Ceramic Devices, South Korea, 2005 - 2015 (US$)
    Figure 6-11: Market for All-Ceramic Devices, South Korea, 2005 - 2015(KRN₩)
    Figure 6-12: Dentures Segmented by Type, South Korea, 2005 - 2015
    Figure 6-13: Market for Dentures, South Korea, 2005 - 2015 (US$)
    Figure 6-14: Market for Dentures, South Korea, 2005 - 2015 (KRN₩)
    Figure 6-15: Market for Dentures Segmented by Type, South Korea,2005 - 2015
    Figure 6-16: Market for CAD/CAM Systems, South Korea, 2005 - 2015(KRN₩ and US$)
    Figure 6-17: Market for Full In-Lab CAD/CAM Systems, South Korea,2005 - 2015 (US$)
    Figure 6-18: Market for Full In-Lab CAD/CAM Systems, South Korea,2005 - 2015 (KRN₩)
    Figure 6-19: Market for Standalone Scanner In-Lab CAD/CAM Systems,South Korea, 2005 - 2015 (US$)
    Figure 6-20: Market for Standalone Scanner In-Lab CAD/CAM Systems,South Korea, 2005 - 2015 (KRN₩)
    Figure 6-21: Market for Chairside CAD/CAM Systems, South Korea,2005 - 2015 (US$)
    Figure 6-22: Market for Chairside CAD/CAM Systems, South Korea,2005 - 2015 (KRN₩)
    Figure 6-23: Market Drivers and Limiters for Dental Prosthetics, South Korea,2008
    Figure 6-24: Market Drivers and Limiters for CAD/CAM Systems, 2008
    Figure 6-25: Leading Competitors, In-Lab CAD/CAM Systems, South Korea,2008
    Figure 6-26: Leading Competitors, CAD/CAM Systems, South Korea, 2008
    Figure 6-27: Leading Competitors, Full In-Lab CAD/CAM Systems,South Korea, 2008
    Figure 6-28: Leading Competitors, Standalone Scanner In-Lab CAD/CAMSystems, South Korea, 2008

JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Figure 7-1: Total Market for Dental Prosthetics, Japan, 2005 - 2015 (US$)
    Figure 7-2: Total Market for Dental Prosthetics, Japan, 2005 - 2015 (JPY¥)
    Figure 7-3: Market for Crowns and Bridges, Japan, 2005 - 2015 (US$)
    Figure 7-4: Market for Crowns and Bridges, Japan, 2005 - 2015 (JPY¥)
    Figure 7-5: Crowns and Bridges Segmented by Material Type, Japan,2005 - 2015
    Figure 7-6: Market for PFM Devices, Japan, 2005 - 2015 (US$)
    Figure 7-7: Market for PFM Devices, Japan, 2005 - 2015 (JPY¥)
    Figure 7-8: Market for Full-Cast Devices, Japan, 2005 - 2015 (US$)
    Figure 7-9: Market for Full-Cast Devices, Japan, 2005 - 2015 (JPY¥)
    Figure 7-10: Market for All-Ceramic Devices, Japan, 2005 - 2015 (US$)
    Figure 7-11: Market for All-Ceramic Devices, Japan, 2005 - 2015 (JPY¥)
    Figure 7-12: Market for Hard-Resin Devices, Japan, 2005 - 2015 (US$)
    Figure 7-13: Market for Hard-Resin, Japan, 2005 - 2015 (JPY¥)
    Figure 7-14: Market for Dentures, Japan, 2005 - 2015 (US$)
    Figure 7-15: Market for Dentures, Japan, 2005 - 2015 (JPY¥)
    Figure 7-16: Market for Dentures by Type, Japan, 2005 - 2015
    Figure 7-17: Market for Dentures Segmented by Type, Japan, 2005 - 2015
    Figure 7-18: CAD/CAM Systems, Japan, 2005 - 2015 (JPY¥ and US$)
    Figure 7-19: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 - 2015(US$)
    Figure 7-20: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 - 2015(JPY¥)
    Figure 7-21: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,2005 - 2015 (US$)
    Figure 7-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,2005 - 2015 (JPY¥)
    Figure 7-23: Market for Chairside CAD/CAM Systems, Japan, 2005 - 2015(US$)
    Figure 7-24: Market for Chairside CAD/CAM Systems, Japan, 2005 - 2015(JPY¥)
    Figure 7-25: Market Drivers and Limiters for Dental Prosthetics, Japan, 2008
    Figure 7-26: Market Drivers and Limiters for CAD/CAM Systems, 2008
    Figure 7-27: Leading Competitors, In-Lab CAD/CAM Systems, Japan, 2008
    Figure 7-28: Leading Competitors, CAD/CAM Systems, Japan, 2008
    Figure 7-29: Leading Competitors, Full In-Lab CAD/CAM Systems, Japan,2008
    Figure 7-30: Leading Competitors, Standalone Scanner In-Lab CAD/CAMSystems, Japan, 2008

AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Figure 8-1: Market for Dental Prosthetics, Australia, 2005 - 2015 (US$)
    Figure 8-2: Market for Dental Prosthetics, Australia, 2005 - 2015 (AUD$)
    Figure 8-3: Market for Crowns and Bridges, Australia, 2005 - 2015 (US$)
    Figure 8-4: Market for Crowns and Bridges, Australia, 2005 - 2015 (AUD$)
    Figure 8-5: Crowns and Bridges Segmented by Material Type, Australia,2005 - 2015
    Figure 8-6: Market for PFM Devices, Australia, 2005 - 2015 (US$)
    Figure 8-7: Market for PFM Devices, Australia, 2005 - 2015 (AUD$)
    Figure 8-8: Market for Full-Cast Devices, Australia, 2005 - 2015 (US$)
    Figure 8-9: Market for Full-Cast Devices, Australia, 2005 - 2015 (AUD$)
    Figure 8-10: Market for All-Ceramic Devices, Australia, 2005 - 2015 (US$)
    Figure 8-11: Market for All-Ceramic Devices, Australia, 2005 - 2015 (AUD$)
    Figure 8-12: Market for Dentures, Australia, 2005 - 2015 (US$)
    Figure 8-13: Market for Dentures, Australia, 2005 - 2015 (AUD$)
    Figure 8-14: Dentures Segmented by Type, Australia, 2005 - 2015
    Figure 8-15: Market for Dentures Segmented by Type, Australia, 2005 - 2015
    Figure 8-16: Market for CAD/CAM Systems, Australia, 2005 - 2015(AUD$ and US$)
    Figure 8-17: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015(US$)
    Figure 8-18: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015(AUD$)
    Figure 8-19: Market for Standalone Scanner In-Lab CAD/CAM Systems,Australia, 2005 - 2015 (US$)
    Figure 8-20: Market for Standalone Scanner In-Lab CAD/CAM Systems,Australia, 2005 - 2015 (AUD$)
    Figure 8-21: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015(US$)
    Figure 8-22: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015(AUD$)
    Figure 8-23: Market Drivers and Limiters for Dental Prosthetics, Australia,2008
    Figure 8-24: Market Drivers and Limiters for CAD/CAM System, 2008
    Figure 8-25: Leading Competitors, In-Lab CAD/CAM Systems, Australia,2008
    Figure 8-26: Leading Competitors, CAD/CAM Systems, Australia, 2008
    Figure 8-27: Leading Competitors, Full In-Lab CAD/CAM Systems, Australia,2008
    Figure 8-28: Leading Competitors, Standalone Scanner In-Lab CAD/CAMSystems, Australia, 2008
    Figure 8-29: Leading Competitors, Chairside CAD/CAM Systems, Australia,2008

ABBREVIATIONS

LIST OF CHARTS

EXECUTIVE SUMMARY

    Chart 1-1: Market for Dental Prosthetics, Asia-Pacific, 2005 - 2015 (US$)
    Chart 1-2: Market Value of Dental Prosthetics by Country, 2008
    Chart 1-3: Unit Share by Material Type for Crowns and Bridges, Asia-Pacific,2005 - 2015
    Chart 1-4: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
    Chart 1-5: Market for CAD/CAM Systems, Asia-Pacific, 2005 - 2015 (US$)
    Chart 1-6: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008

RESEARCH METHODOLOGY
INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS
ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Chart 4-1: Combined Markets for Dental Prosthetics, Asia-Pacific, 2005 - 2015(US$)
    Chart 4-2: Crown and Bridge Units Segmented by Material Type, Asia-Pacific,2005 - 2015
    Chart 4-3: Market for Crowns and Bridges, Asia-Pacific, 2005 - 2015, (US$)
    Chart 4-4: Market for Dentures, Asia-Pacific, 2005 - 2015 (US$)
    Chart 4-5: Overall Market for CAD/CAM, Asia-Pacific, 2005 - 2015 (US$)
    Chart 4-6: Market for Full In-Lab CAD/CAM Systems, Asia-Pacific,2005 - 2015 (US$)
    Chart 4-7: Market for Standalone Scanner In-Lab CAD/CAM Systems,Asia-Pacific, 2005 - 2015 (US$)
    Chart 4-8: Market for Chairside CAD/CAM Systems, Asia-Pacific, 2005 - 2015(US$)
    Chart 4-9: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008
    Chart 4-10: Leading Competitors, CAD/CAM Systems, Asia-Pacific, 2008

COUNTRY PROFILES

    Chart 5-1: Country Statistics, South Korea, 2008
    Chart 5-2: Country Statistics, Japan, 2008
    Chart 5-3: Country Statistics, Australia, 2008

SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Chart 6-1: Total Market for Dental Prosthetics, South Korea, 2005 - 2015 (US$)
    Chart 6-2: Market for Crowns and Bridges, South Korea, 2005 - 2015 (US$)
    Chart 6-3: Crowns and Bridges Segmented by Material Type, South Korea,2008
    Chart 6-4: Crowns and Bridges Unit Share by Material Type, South Korea, 2005- 2015
    Chart 6-5: Market for Dentures, South Korea, 2005 - 2015 (US$)
    Chart 6-6: Market for Dentures Segmented by Type, South Korea, 2005 - 2015
    Chart 6-7: Total Market for CAD/CAM Systems, South Korea, 2005 - 2015(US$)
    Chart 6-8: Market for Full In-Lab CAD/CAM Systems, South Korea,2005 - 2015 (US$)
    Chart 6-9: Market for Standalone Scanner In-Lab CAD/CAM Systems,South Korea, 2005 - 2015 (US$)
    Chart 6-10: Market for Chairside CAD/CAM Systems, South Korea, 2005 - 2015(US$)
    Chart 6-11: Leading Competitors, In-Lab CAD/CAM Systems, South Korea,2008
    Chart 6-12: Leading Competitors, CAD/CAM Systems, South Korea, 2008
    Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Units,South Korea, 2008
    Chart 6-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM SystemUnits, South Korea, 2008

JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Chart 7-1: Total Market for Dental Prosthetics, Japan, 2005 - 2015 (US$)
    Chart 7-2: Market for Crowns and Bridges, Japan, 2005 - 2015 (US$)
    Chart 7-3: Crowns and Bridges Segmented by Material Type, Japan, 2008
    Chart 7-4: Crowns and Bridges Unit Share by Material Type, Japan,2005 - 2015
    Chart 7-5: Market for Dentures, Japan, 2005 - 2015 (US$)
    Chart 7-6: Market for Dentures Segmented by Type, Japan, 2005 - 2015
    Chart 7-7: Market for CAD/CAM Systems, Japan, 2005 - 2015 (US$)
    Chart 7-8: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 - 2015(US$)
    Chart 7-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,2005 - 2015 (US$)
    Chart 7-10: Market for Chairside CAD/CAM Systems, Japan, 2005 - 2015(US$)
    Chart 7-11: Leading Competitors, In-Lab CAD/CAM Systems, Japan, 2008
    Chart 7-12: Leading Competitors, CAD/CAM Systems, Japan, 2008
    Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Units, Japan,2008
    Chart 7-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM SystemUnits, Japan, 2008

AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAMSYSTEMS

    Chart 8-1: Market for Dental Prosthetics, Australia, 2005 - 2015 (US$)
    Chart 8-2: Market for Crowns and Bridges, Australia, 2005 - 2015 (US$)
    Chart 8-3: Market for Crowns and Bridges Segmented by Material Type, 2008
    Chart 8-4: Crowns and Bridges by Material Type, Australia, 2005 - 2015
    Chart 8-5: Market for Dentures, Australia, 2005 - 2015 (US$)
    Chart 8-6: Market for Dentures Segmented by Type, Australia, 2005 - 2015
    Chart 8-7: Market for CAD/CAM Systems, Australia, 2005 - 2015 (US$)
    Chart 8-8: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 - 2015(US$)
    Chart 8-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Australia,2005 - 2015 (US$)
    Chart 8-10: Market for Chairside CAD/CAM Systems, Australia, 2005 - 2015(US$)
    Chart 8-11: Leading Competitors, In-Lab CAD/CAM Systems, Australia, 2008 . 208
    Chart 8-12: Leading Competitors, CAD/CAM Systems, Australia, 2008
    Chart 8-13: Leading Competitors, Full In-Lab CAD/CAM System Units,Australia, 2008
    Chart 8-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM SystemUnits, Australia, 2008
    Chart 8-15: Leading Competitors, Chairside CAD/CAM System Units, Australia,2008

ABBREVIATIONS

Published By: iData Research
Product Code: iData Research1020

Did you find what you are/were looking for ? If not, read below and browse through other relevant pages for similar market research reports OR get in touch with us through the form/contact info in your right navigation panel and we’ll share relevant market report titles for you to explore.

Related Reports:

Asia-Pacific Markets for Minimally Invasive Spinal Devices 2011 (Australia, Japan and South Korea)
Report SummaryThe Asia-Pacific MIS spinal implant markets are expected to reach $83 million by 2017. The Asia-Pacific spinal implant markets comprises two segments:minimally invasive thoracolum...
U.S. Market for Dental Prosthetics and CAD/CAM Devices 2011
In 2010, the U.S. market for dental prosthetics, which includes crowns, bridges, inlays/onlays, veneers and dentures, exceeded $11 billion. The market has recovered from the slowdown caused by the econom...
Emerging Markets: Chinese and Indian Dental Prosthetics and CAD/CAM Devices 2011
In 2010, the total Chinese and Indian markets for Dental Prosthetics and CAD/CAM were valued at nearly $666 million, a 7.5% increase over the pre...
South Korean Market for Dental Prosthetics and CAD/CAM Devices 2011
South Korea has the second largest market for dental prosthetics in the Asia-Pacific market. The emphasis on dental aesthetics in South Korea is ...
Australian Market for Dental Prosthetics and CAD/CAM Devices 2011
The Australian market for dental prosthetics was the third largest market in the Asia- Pacific region in 2010. Compared to other countries, Austr...
Japanese Market for Dental Prosthetics and CAD/CAM Devices 2011
In 2010, the Japanese market for dental prosthetic and CAD/CAM devices was the largest in Asia-Pacific region. The market for dental prosthetics ...
Asia Pacific Markets for Dental Prosthetics and CAD/CAM 2011
In 2010, the total Asia-Pacific markets for dental prosthetics (made up of Japan, South Korea and Australia) were valued at $6.4 billion, a 0.1% ...
Beleuxian Market for Dental Prosthetics and CAD/CAM Devices 2011
The Benelux market includes the Netherlands, Belgium and Luxembourg. The market in the Netherlands experienced substantial growth due to the introduction of a reimbursement policy for dentures in 2005. B...
Austrian Market for Dental Prosthetics and CAD/CAM Devices 2011
Austria is a member of the European Union located in Central Europe and has a population of approximately 8.4 million. Austria is a growing and affluent market. There were approximately 4,500 dentists in the c...
South Korean Market for Dental Prosthetics and CAD/CAM Devices 2010
South Korea has the second largest population of the countries covered in this report, and thereby the second largest market for dental prosthetics, behind Japan. The market is primarily driven by the low labor and manufacturing costs of dental pr...

Connect With Us

Email: sales@reportsandreports.com Call : + 1 888 391 5441

Subscription Option

Using our subscription option, you get access to market research reports and industry data of Medical Devices market as per your needs. Get the best of Medical Devices research reports by utilizing your research budgets in an optimum way.

More about our Subscription option

Email Alerts

Get Email alerts about market research reports from industries and publishers of your interest: