Global (North America, Europe, Asia-Pacific, South America, Middle East and Africa) Magnetic Particle Market 2018, Forecast to 2023

Published: June 2018
No. of Pages: 152
Single User License: US $ 4880
Corporate User License: US $ 9760
ReportsandReports

Ferrites
Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico
These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt
They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)
Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.
Ferrites
Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico
These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt
They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)
Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.


Scope of the Report:
This report focuses on the Magnetic Particle in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Demand is driven by demographics and the health of the economy. The profitability of individual companies depends on their ability to bid accurately, secure contracts, and control costs. Large companies enjoy economies of scale in financing and the ability to offer a broad range of services in many locations. Smaller companies can compete effectively by specializing in particular services or focusing on a certain geography.
China domestic Magnetic Particle industry developed fast, which accounts for almost 89% of total NdFeB Magnetic Particle production and 82% of Ferrites Magnetic Particle production. Though Chinese companies have low price advantage, the quality of domestic products is relatively poor.
The worldwide market for Magnetic Particle is expected to grow at a CAGR of roughly 3.2% over the next five years, will reach 1650 million US$ in 2023, from 1370 million US$ in 2017, according to a new GIR (Global Info Research) study.

Market Segment by Manufacturers, this report covers
- MQI
- Aichi Steel
- Zhao Ri Ke
- Galaxy Magnets
- Yuhong
- Huiling
- Western Magnet
- San Huan
- Hoosier Magnetics
- Todakogyo
- HIMAG
- DMEGC Magnetics
- Zhejiang Ante
- Maanshan CY
- BGRIMM Magnetic
- Shunde Baling
- MGC
- Comc Technology

Market Segment by Regions, regional analysis covers
- North America (United States, Canada and Mexico)
- Europe (Germany, France, UK, Russia and Italy)
- Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
- South America (Brazil, Argentina, Colombia etc.)
- Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)

Market Segment by Type, covers
- Ferrites
- Neodymium(NdFeB)

Market Segment by Applications, can be divided into
- Auto Industry
- Household Appliance Industry
- Computer Industry
- Electronic Toys
- Electroacoustic Product
- Military Application

There are 15 Chapters to deeply display the global Magnetic Particle market.
Chapter 1, to describe Magnetic Particle Introduction, product scope, market overview, market opportunities, market risk, market driving force;
Chapter 2, to analyze the top manufacturers of Magnetic Particle, with sales, revenue, and price of Magnetic Particle, in 2016 and 2017;
Chapter 3, to display the competitive situation among the top manufacturers, with sales, revenue and market share in 2016 and 2017;
Chapter 4, to show the global market by regions, with sales, revenue and market share of Magnetic Particle, for each region, from 2013 to 2018;
Chapter 5, 6, 7, 8 and 9, to analyze the market by countries, by type, by application and by manufacturers, with sales, revenue and market share by key countries in these regions;
Chapter 10 and 11, to show the market by type and application, with sales market share and growth rate by type, application, from 2013 to 2018;
Chapter 12, Magnetic Particle market forecast, by regions, type and application, with sales and revenue, from 2018 to 2023;
Chapter 13, 14 and 15, to describe Magnetic Particle sales channel, distributors, traders, dealers, Research Findings and Conclusion, appendix and data source

Published By: Global Info Research
Product Code: Global Info Research399578


Did you find what you are/were looking for ? If not, read below and browse through other relevant pages for similar market research reports OR get in touch with us through the form/contact info in your right navigation panel and well share relevant market report titles for you to explore.

Related Reports:


Why ReportsnReports.com?

  • 500,000 market research reports and growing.
  • Top Fortune 500 Organizations trust us for research data.
  • 24/7 support on call as well as emails.
  • Your Details are safe with us.
  • Free support for your research requirements.
  • Report Delivery: Email
  • Delivery Time:
    • Upto 24 hrs - working days
    • Upto 48 hrs max - weekends and public holidays

Research Support / Custom Research

If this business study does not have the data and information analysis you need, contact us with your research requirements. We explore available market research reports to map your needs and share report titles with you. Alternatively, we can also offer custom research that suits your budget and timelines. Share your information requirements here.
Connect With Us
Email: sales@reportsandreports.com Call : + 1 888 391 5441

Subscription Option

Using our subscription option, you get access to market research reports and industry data of Consumer Goods market as per your needs. Get the best of Consumer Goods research reports by utilizing your research budgets in an optimum way.

More about our Subscription option
Report Alerts

Get Email alerts about market research reports from industries and publishers of your interest:

We use cookies to deliver the best possible experience on our website.
By continuing to use this site, or closing this box, you consent to our use of cookies. To learn more, visit our Privacy Policy